View IP4100CY20-01T_7760293.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

d a t a sh eet preliminary speci?cation file under advanced ceramics and modules, acm4 1999 jul 29 advanced ceramics and modules ip4100 series 9-channel ieee 1284 filter/termination with 2 kv esd protection
1999 jul 29 2 philips components preliminary speci?cation 9-channel ieee 1284 ?lter/termination with 2 kv esd protection ip4100 series features 9-channel rc filter array with pull-up resistors esd protection: >2 kv undershoot protection high capacitance range available in 20-pin or 24-pin qsop and 20-pin soic packages. applications ieee 1284 filter/termination for: workstations desktop and portable computers pdas pcmica cards. description the philips ip4100 series of application specific integrated products (asips) is a 9-channel solution for termination and filtering for high speed ieee 1284 parallel interfaces while also providing esd protection of >2 kv. ip4100 devices are fabricated using thin film-on-silicon technology and integrates 18 resistors, 9 capacitors and 18 diodes in various package configurations. the ip4100 is configured as low pass filters with high impedance pull-ups. as filters, the ip4100 will pass low frequency digital data and attenuate undesired high frequency signals. as terminations, the ip4100 will reduce reflections caused by transmission line effects of long cable lines. the integral diodes of the ip4100 provide esd protection of <2 kv. furthermore, the diodes help maintain signal integrity on digital transmission lines by reducing logic undershoot conditions. quick reference data description value electrical characteristics at 25 c resistance 10%; see table 1 capacitance 20%; see table 1 operating voltage, v cc 0 to +5.5 v esd protection iec 61000-4-2, level 1 (2 kv) power rating per channel 100 mw, package limited package ratings maximum dissipation at: t amb =70 c1w t amb =85 c 0.83 w operating temperature - 25 to +85 c storage temperature - 60 to +150 c
1999 jul 29 3 philips components preliminary speci?cation 9-channel ieee 1284 ?lter/termination with 2 kv esd protection ip4100 series fig.1 functional diagram for 20-pin packages. handbook, halfpage ccb972 20 119 r1 r2 218 r1 r2 317 r1 r2 416 r1 r2 515 r1 r2 614 r1 r2 713 r1 r2 812 r1 r2 911 10 r1 r2 fig.2 functional diagram for 24-pin packages. handbook, halfpage ccb973 24 322 1 23 2 r1 r2 421 r1 r2 520 r1 r2 619 r1 r2 718 r1 r2 817 r1 r2 916 r1 r2 10 15 r1 r2 11 14 12 13 r1 r2
1999 jul 29 4 philips components preliminary speci?cation 9-channel ieee 1284 ?lter/termination with 2 kv esd protection ip4100 series ordering information ordering code (1) for r/c codes, see table 1. handbook, full pagewidth i p 4 1 0 0 c y 2 0 - 0 1 s philips p/n series operating temperature range ( - 25 to + 85 c) (y = qsop; r = soic) package type packaging resistance/capacitance code (1) number of pins (20 or 24) s t reel: 330 mm (13") tube ccb974 table 1 standard r/c values, ordering information and packaging quantities note 1. the qsop package has a tube quantity of 56 units. r/c codes resistance value capacitance value (pf) catalogue number ip4100cy(r)20(24)-... r1 (k w ) r2 ( w ) reel 330 mm (13") 1000 units tube 55 units (1) -01 4.7 33 180 01s 01t -02 2.2 33 220 02s 02t -03 1.0 33 180 03s 03t
1999 jul 29 5 philips components preliminary speci?cation 9-channel ieee 1284 ?lter/termination with 2 kv esd protection ip4100 series packaging soic20 package outline table 2 package dimensions; see fig.3 dimension value unit min. max. a 2.43 2.64 mm a 1 0.10 0.30 mm b 0.36 0.46 mm c 0.23 0.32 mm d 12.65 12.85 mm e 7.39 7.60 mm h e 10.06 10.52 mm e 1.27 nom. mm l 0.51 1.02 mm q 0 8 deg fig.3 soic20 plastic shrink small outline package; 20 leads; wide body 7.39 mm. for dimensions see table 2. handbook, full pagewidth detail a ccb878 detail a q a a 1 b d h e l e e c 110 20 11 pin 1 index
1999 jul 29 6 philips components preliminary speci?cation 9-channel ieee 1284 ?lter/termination with 2 kv esd protection ip4100 series qsop20 package outline table 3 package dimensions; see fig.4 dimension value unit min. max. a 1.35 1.75 mm a 1 0.10 0.30 mm b 0.20 0.30 mm c 0.15 0.25 mm d 8.55 8.74 mm e 3.81 3.99 mm h e 5.79 6.20 mm e 0.635 nom. mm l 0.40 1.27 mm q 0 8 deg fig.4 qsop20 plastic shrink small outline package; 20 leads; narrow body width 3.81 mm. for dimensions see table 3. handbook, full pagewidth detail a ccb878 detail a q a a 1 b d h e l e e c 110 20 11 pin 1 index
1999 jul 29 7 philips components preliminary speci?cation 9-channel ieee 1284 ?lter/termination with 2 kv esd protection ip4100 series qsop24 package outline table 4 package dimensions; see fig.4 dimension value unit min. max. a 1.35 1.75 mm a 1 0.10 0.30 mm b 0.20 0.30 mm c 0.15 0.25 mm d 8.55 8.74 mm e 3.81 3.99 mm h e 5.79 6.20 mm e 0.635 nom. mm l 0.40 1.27 mm q 0 8 deg fig.5 qsop24 plastic shrink small outline package; 20 leads; narrow body width 3.81 mm. for dimensions see table 4. handbook, full pagewidth ccb975 detail a q a 1 a b d h e l detail a e e c 112 24 13 pin 1 index
1999 jul 29 8 philips components preliminary speci?cation 9-channel ieee 1284 ?lter/termination with 2 kv esd protection ip4100 series blister tape speci?cations fig.6 blister tape. k 0 : so chosen that the orientation of the component cannot change. for dimensions see table 5. (1) pocket position relative to sprocket hole measured as true position of pocket, not pocket hole. handbook, full pagewidth f e w 1 w a 0 pin 1 designator q d 0 p p 2 p 0 (1) direction of unreeling ccb884 d 1 b 0 g k t 1 k 0 d d t
1999 jul 29 9 philips components preliminary speci?cation 9-channel ieee 1284 ?lter/termination with 2 kv esd protection ip4100 series table 5 dimensions of blister tape; see fig.6 notes 1. typical displacement in pocket. 2. p 0 pitch tolerance over any 10 pitches is 0.2 mm. parameter dimension (mm) tolerance (mm) qsop20/24 package soic20 package a 0 nominal clearance; note 1 6.5 10.9 0.1 b 0 nominal clearance; note 1 9.0 13.3 0.1 k 0 minimum clearance; note 1 2.3 3.0 0.1 k <2.4 <3.2 - g >0.75 >0.75 - q <15 <15 - d <0.3 <0.3 - w 16.0 24.0 0.3 e 1.75 1.75 0.1 f 7.5 7.5 0.1 d 0 1.5 1.5 +0.1/ - 0.0 d 1 min 1.5 1.5 - p 0 ; note 2 4.0 4.0 0.1 p 8.0 12.0 0.1 p 2 2.0 2.0 0.1 t <0.35 <0.35 - t 1 <0.1 <0.1 -
1999 jul 29 10 philips components preliminary speci?cation 9-channel ieee 1284 ?lter/termination with 2 kv esd protection ip4100 series reel speci?cations table 6 reel dimensions; see fig.7 tape width (mm) a nom. (mm) t (mm) w (mm) b (mm) c (mm) e min. (mm) u min. (mm) o 16 330 3 +0.0/ - 1.5 16.4 +2.0/ - 0.0 101 1.5 13 +0.5/ - 0.2 1.5 3.6 120 24 330 3 +0.0/ - 1.5 24.4 +2.0/ - 0.0 101 1.5 13 +0.5/ - 0.2 1.5 3.6 120 handbook, full pagewidth mea942 o e u leader fixing tape trailer cba w t fig.7 reel. for dimensions see table 6. minimum trailer length: 160 mm. minimum leader length: 390 mm.
1999 jul 29 11 philips components preliminary speci?cation 9-channel ieee 1284 ?lter/termination with 2 kv esd protection ip4100 series quality and reliability wafer fabrication and packaging technology philips asips use well-proven semiconductor industry thin film-on-silicon fabrication and packaging technologies. wafers are processed in a clean room wafer fabrication environment with circuit elements defined using a photolithography process. metal disposition is performed by precision sputter process. finished wafers are diced, assembled and tested in a state-of-the-art assembly and packaging facility fully compliant with iso 9002. tests and requirements the following tests have been conducted on representative samples of philips asips in qsop (ssop), soic and similar industry standard plastic packages in accordance with the appropriate iec, eia and eiaj requirements. table 7 test procedures and requirements eia/jesd22 test method test procedure requirements b102-a solderability (after ageing) 8 hours steam; immersed for 5 s in a solder bath at 215 c good tinning ( 3 95% covered); no visible damage a113-a smd sequential stress preconditioning; 5 cycles: - 55 to +125 c; 24 hours bake; temperature and humidity soak; 3 cycles of ir convection re?ow at maximum 220 c device functional; no visible damage; sat inspection a104-a temperature cycling 1000 cycles: 10 minutes minimum at - 65 c 10 minutes minimum at +150 c no visible damage; d r/r max.: 1%; d c/c max.: 1% a102-b autoclave (pressure pot) 336 hours: 121 c, 100% rh no visible damage; d r/r max.: 1%; d c/c max.: 1% a101-b temperature; humidity; bias 1000 hours: 85 c; 85% rh; reverse voltage bias no visible damage; d r/r max.: 1%; d c/c max.: 1% a108-a high temperature reverse bias 1000 hours: 125 c; reverse voltage bias no visible damage; d r/r max.: 1%; d c/c max.: 1% a108-a high temperature operating life 1000 hours: 125 c; each channel with maximum power per spec. no visible damage; d r/r max.: 1%; d c/c max.: 1%
1999 jul 29 12 philips components preliminary speci?cation 9-channel ieee 1284 ?lter/termination with 2 kv esd protection ip4100 series definitions life support applications these products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. philips customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify philips for any damages resulting from such improper use or sale. data sheet status objective speci?cation this data sheet contains target or goal speci?cations for product development. preliminary speci?cation this data sheet contains preliminary data; supplementary data may be published later. product speci?cation this data sheet contains ?nal product speci?cations. application information where application information is given, it is advisory and does not form part of the speci?cation.

▲Up To Search▲

Price & Availability of IP4100CY20-01T

	To Download IP4100CY20-01T Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .